ICP
DAS,
ZT
‐
2000
DIO
SERIES
Quick
Start,
Version
1.2.1
Page
2
Copyright
©
2013
by
ICP
DAS
Co.,
Ltd.
All
Rights
Reserved.
3
Setting
up
the
ZT
‐
2000
DIO
Device
3.1
Introduction
to
the
Configuration
Parameters
A.
“Pan ID”
parameter is the group identity for a ZigBee network, and must
the same for all devices in the same ZigBee network.
“Address/Node ID”
parameter is the individed identity of a specific the
ZigBee module, and must be unique for each device connected the same
ZigBee network.
B.
“RF Channel”
parameter indicates the radio frequency channel, and must
be set to the same value as other modules on the same ZigBee network.
Channel
0x00
0x01
……
0x0F
Frequency(MHz) 2405
2410
……
2480
※
RF channels 0x04, 0x09, 0x0E or 0x0F are recommended because they do
not overlap with the Wi-Fi frequencies based.
C.
Protocol/Application Mode：
When implementing custom programs based on different protocols, the
following application modes are recommended in order to ensure
communicatible
User Program Protocol
ZT-2000 I/O
ZT-2550
ZT-2570
DCON
DCON
Transparent
Transparent
Modbus RTU
Modbus RTU
Transparent
Modbus Gateway
Transparent
Modbus Gateway
Modbus TCP
Modbus RTU
------
Modbus Gateway
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
802.11b/g
Channel
1
802.11b/g
Channel
6
802.11b/g
Channel
11
802.11b/g
Channel
(North
America)
802.15.4
Channel
2400
MHz
2485
MHz
