ICP DAS SST-900B User Manual v1.0, 2011/05 Page
19
is set for Normal Mode (0x01).
2.
Launch the MBRTU_Utility tool.
3.
Select the number of the COM Port you want, then adjust the
Baud Rate and enter the data format in the “Line Control” filed.
Remember to click “Open”.
4.
Attempt to send a command relative to the M-7000 module.
In the Command field, enter a command such as
“
1 1 0 0 0 1
”, then click the “
Send Command”
button.
5.
If the transmission has been successful, the message should
appear in the Response field, as indicated below.