background image

1

T 330 - GSM 822 Eng.  

10.12.01

We reserve the right to make changes without notice

COSTER

REMOTE DUAL BAND
GSM MODEM

GSM 822  

Eng.

• Uses GSM 900/1800 MHz digital telecommunication networks
• Communicates with central desk-top modems (e.g. MCV 711 & GSM 712)

1.APPLICATION

GSM 822 modem is used in “TELECOSTER “ telemanagement systems, installed at remote sites (e.g. boiler plants)
for communicating data to and from the central site.

2.FUNCTIONS

GSM 822 modem is an E-GSM dual band (900/1800MHz) modem with a configurable transmission speed of 2400
to 14,400 bps both in non-transparent (with error correction) and transparent (without error correction) modes.

The minimum communication speed over the network is 2400 bps so it cannot be called up by a modem that
supports lower network rates, as, for example, COSTER MCT 710 desktop modem.

Supports AT+ commands in conformity with standard ETSI GSM 07.05 & 07.07 & V.25ter.
The digital interface conforms to Recommendations ITU-TV.24 & V.28.
It is equipped with a self-diagnostic function that indicates when GSM carrier detected.

3.REFERENCE STANDARDS

The protocol specifications are based on the following standards:

• ETSI GSM 07.07 : European digital cellular telecommunication system (Phase 2).  At command set for GSM

Mobile Equipment.

• ETSI GSM 07.05 : European digital cellular telecommunication system (Phase 2). Use of DTE/DCE interface for

Short Message service and cell broadcast service.

• ITU-T V.25ter : "serial asynchronous automatic dialing and control".

T 330

10.12.01

4.MODEM ACCESSORIES

Code

Description

APA 812

5 m cable for extending antenna modems GSM 712 and GSM 822

ACM 822

Serial cable for direct connection to PC

ALM 688

Back-up power supply

C     BUS

TO SEE A SUITABLE REPLACEMENT PRODUCT

DISCONTINUED PRODUCT

Summary of Contents for GSM 822

Page 1: ...k rates as for example COSTER MCT 710 desktop modem Supports AT commands in conformity with standard ETSI GSM 07 05 07 07 V 25ter The digital interface conforms to Recommendations ITU TV 24 V 28 It is equipped with a self diagnostic function that indicates when GSM carrier detected 3 REFERENCE STANDARDS The protocol specifications are based on the following standards ETSI GSM 07 07 European digita...

Page 2: ... dBm 2 dB 900 30 dBm 2 dB 1800 Antenna RF SMA connector Electrical mechanical Power supply 230 V 10 Frequency 50 60 Hz Consumption 5 VA Protection excess voltage self reset fuse Electrical protection IP 54 Construction standards Italian Electrotech Committee CEI Ambient temperature operation 20 55 C storage 25 70 C Dimensions 195 x 97 x 250 mm W x D x H Weight 1 40 kg 6 FRONT PANEL 7 WIRING DIAGRA...

Page 3: ...advisable to purchase your SIM card from your chosen GSM network service providers agent When purchasing it is indispensable to ask for a card enabled for the transmission and reception of data and fax Usually the telephone operator will supply a SIM card with three telephone numbers a VOICE number to be used for voice telephone calls a FAX number to be used for fax communication a DATA number to ...

Page 4: ...r and as a consequence you have to change the data transmission mode from Transparent to Not transparent or vice versa Disconnect the serial port connection of the GSM dual band modem 6 1 from the interface base 6 6 Connecttotheserialportofthemodem nowfree acomputeronwhichisinstalledwiththeSWC701telemanagement program using an ACM822 serial cable Go to SETTINGS RS232 of SWC 701 program configure c...

Reviews: