manualshive.com logo in svg
background image

 

_______________ 
TSI and TSI logo are registered trademarks of TSI Incorporated. DustTrak is a trademark of TSI Incorporated. 
Netronix  and Thiamis are trademarks of Netronix Inc. Digi and XStream are trademarks of Digi International.  

QUICK START GUIDE 

INSTALLING

 

THE

 

NETRONIX™

 

THIAMIS™

 

 

GSM/GPS

 

COMMUNICATION

 

MODEM

 

IN 

THE

 

ENVIRONMENTAL

 

ENCLOSURE 

MODEL 8535

 

 

This guide will help you quickly install the Netronix

™ 

Thiamis

™ GSM/GPS Communication Modem for 

Environmental Enclosure Model 8535.  

Unpacking Netronix Thiamis 
GSM/GPS Communication 
Modem (801901) 

1.  Unpack the Netronix 

TM

 Thiamis

TM

 GSM/GPS 

Communication Modem (801901) for the 
Environmental Enclosure (8535) and verify that all 
the items listed in the following table are present.  

2.  Contact 

TSI

 immediately if items are missing or 

broken.  

 

Qty. 

Item Description 

Reference Picture 

Adapter Plate 

 

Hex Standoffs 

 

Washers 

 

4-

40 x 3/16” socket head 

screws 

 

O-ring 

 

Antenna Housing 

 

Qty. 

Item Description 

Reference Picture 

Power Cable 

 

Spare Fuse 

 

Netronix

 

Thiamis 

GSM/GPS 
Communication Modem 

 

GSM-GPS Antenna 

 

Button head hex screws 

 

RS232 to USB Converter 
Cable 

 

Tools Needed for Installation 

Qty. 

Item Description 

Reference Picture 

Phillips Screw Driver 

 

¼” Nut Driver 

 

3/32” Ball Driver 

 

1/8” Allen Wrench 

 

Содержание NETRONIX THIAMIS 8535

Страница 1: ...ion Modem 801901 1 Unpack the Netronix TM ThiamisTM GSM GPS Communication Modem 801901 for the Environmental Enclosure 8535 and verify that all the items listed in the following table are present 2 Contact TSI immediately if items are missing or broken Qty Item Description Reference Picture 1 Adapter Plate 4 Hex Standoffs 4 Washers 4 4 40 x 3 16 socket head screws 1 O ring 1 Antenna Housing Qty It...

Страница 2: ...a housing from the 8535 enclosure with a Phillips head screw driver and save the screws for a later step Preparation of Environmental Enclosure 8535 if Purchased without a Digi XStream PKG RF Modem 1 If the Environmental Enclosure was purchased without a wireless Digi XStream PKG RF Modem remove the two screws shown along with the nuts and washers attached to the screws Save the screws for a later...

Страница 3: ...roove at the base of the antenna housing 4 Using the previously installed screws fasten the antenna housing with the O ring to the enclosure 5 Remove the slip nut from the GSM GPS antenna 6 Feed the GSM and GPS cables down the antenna housing and screw the GSM GPS antenna onto the antenna housing 7 Fasten the Thiamis unit to the adapter plate using the 1 8 hex driver and button head hex screws 8 C...

Страница 4: ...S A 9 Connect the RS 232 to USB converter cable to the Thiamis unit and the DustTrak Aerosol Monitor 10 Connect power cable to the AC power cable connector or battery cable connector not shown 11 Connect the phoenix connector end of the power cable to the Thiamis unit 12 Connect the barrel connector end of the power connector to the DustTrak Aerosol Monitor 13 Connect the locking connector end of ...

Отзывы: