ICP DAS SST-900B User Manual v1.0, 2011/05 Page
12
4.2.5
Network communication
– Application 2
In this case, it is better to use Broadcast mode rather than P2P mode.
If the modules are set to P2P mode, then there will be a communication
requirement between PC (1) and PC (2). However, because they are
acting in the roles of a server or a client, they will not be able to directly
communicate with each other. So, in this situation, it would be better to
set the modules to broadcast mode, in order to allow communication
between two nodes.
1
2
