ICP DAS CO., LTD. www.icpdas.com
Sparrow
IMS-130 IEEE 1394b Camera Series
QuickStart
Ver. 1.1
Thank you for purchasing Sparrow IEEE 1394b camera series. This QuickStart includes
some important information such as how to use this camera correctly and safely. Please
read through this installation guide carefully. For detail camera operation please refer
Sparrow IMS-130 User
’s manual. You can get the completed User’s manual after driver CD
install completed, or you can download pdf file from our website at
Standard Package Contents
Camera with Lens-cap
Driver CD
8-pin GPIO Wiring Connector
Tripod Adapter with screws
Camera Interface
8-pin GPIO
IEEE 1394b
No.
Define
No.
Define
1
Opto-Isolated Trigger Input
1
TPB-
2
Opto-isolated Output
2
TPB+
3
TTL GPIO2
3
TPA-
4
TTL GPIO3
4
TPA+
5
Opto GND
5
TPA(R)
6
TTL GND
6
Power GND
7
V
EXT
7
Status Contact
8
+3.3V
8
Power
9
TPB(R)
BEFORE USE
– GERNAL SAFETY INSTRUCTIONS
CAUTION
DO NOT open the camera housing.
Touching internal components
may damage camera function. Meanwhile when customer to open
camera housing then warranty will be void immediately.
Be careful not to allow liquids, flammable or metallic material inside of
the camera.
Driver Installation
1. Do not plug any Sparrow IMS-130 cameras to your system before driver install
completed.
2. Put the Sparrow driver CD to your system CD-ROM driver for installation.
3. Please just press
“Next” button then driver will install automatically and when
install completed please refer
Chapter 3 Installation Guide of Sparrow
User
’s Manual
for detail hardware and software installation information.
4. When install completed then you will find Sparrow 1394 Camera Device in
your system Device Manager.
5. Also you can run EZView Pro utility for image acquisition test.
