PET-AR400 User Manual
V1.0.0
P.29
To set the data acquisition mode to N Sample Acquisition mode
To set the data acquisition mode to N sample acquisition mode, you need to configure the
following parameters:
In
Configurations
tab
Channels
：
Select the number of channel to be enabled.
Trigger
：
Select
Analog threshold trigger
as the trigger type.
Sample Rate
：
Specify a value of the sample rate from 0 to 128000.
Sample Count
：
Specify a value of the target sample from 0 to 15000000. 0 means keep
collecting data until stop command is received.
In
Analog Setting
tab
High Level/Low Level
：
Specify a value of the analog threshold trigger high/low level from
+10 to -10.
AI Mode
：
Select the analog threshold trigger conditional and specify a value of the
left/right count.
The Analog Setting tab will be displayed when
the Analog threshold trigger is selected
