PET-AR400 User Manual
V1.0.0
P.28
Step 3
：
Set the Data Acquisition Mode
PET-AR400 offers two data acquisition modes
：
one is continuous real-time acquisition mode
triggered by software commands, and the other is N sample acquisition mode is activated When
the analog input exceeds the specified threshold value.
To set the data acquisition mode to Continuous Acquisition mode
To set the data acquisition mode to continuous acquisition mode, you need to configure the
following settings:
Channels
：
Select the number of channel to be enabled.
Trigger
：
Select
Software Start
as the trigger type.
Sample Rate
：
Specify a value of the sample rate from 0 to 128000.
Sample Count
：
Specify a value of the target sample from 0 to 15000000. 0 means keep
collecting data until stop command is received.
