M-4132 User Manual (Version 1.60, May/2014) PAGE：
13
Figure 8: Dip Switch and Trigger Button
Table 6: Dip switch and trigger button for initial function
Option
State
Description
Recover default
setting forever
SW2=ON
SW1=ON
To press the TB about 40
second after power on
All system settings will be cleared and
recover default settings.
(Warning: it will not restore settings
after clear)
IP recover default
setting for this
time
SW2= OFF
SW1= ON
To press the TB about 40
second after power on
After power on, it will set IP to default
setting (192.168.1.217) for this time,
but it will restore original IP at next
time.
IP recover default
setting forever
SW2= ON
SW1= OFF
To press the TB about 40
second after power on
After power on, it will set IP to default
setting (192.168.1.217) and save to
flash.
Display the
current IP and
version
SW2=OFF
SW1=OFF
To press the TB about 40
second after power on
After power on, it will display the
message about current IP and version
information from Com Port(RS-232).
Normal setting
The other states
Normal state; It will not change any
setting and data.
