P6
4
LED indicator
The module provides one LED indicator. The table below will show the LED status.
Indicators
Status
Instructions
STA
500ms
Blink
continuous
Illegal Node ID, please set the Node ID
to 1~31, and then power on.
Blink once
Low battery power.
1.
Please confirm whether the CT is
lock into the “CT” pin of the module
and bucked to the wire for charging.
2.
If have any questions, please
contact technology support.
Blink twice
Component status is abnormal.
1.
Please confirm whether the audio
line of “Ext_Bus” is fully inserted
and the module is power off. And
power on after press “Wake” and
“Boot” buttons for 5 seconds.
2.
If have any questions, please
contact technology support.
Blink three
times
Unable to confirm sensor type.
1.
Please confirm whether the audio
line of “Ext_Bus” is fully inserted
and the module is power off. And
power on after press “Wake” and
“Boot” buttons for 5 seconds.
2.
If have any questions, please
contact technology support.
