Getting Started: I-8437-80/8837-80/8417/8817, Jul 2020 V4.0 18
After the installation, click the Windows “Start” and point to “Programs” and “ISaGRAF 3.5”,
then click “Project” to open the ISaGRAF.
2.1.1
The Hardware Protection Device (Dongle & USB Key-Pro)
You must install the hardware protection device (dongle) provided with the ISaGRAF software
on your computers parallel port to for the ISaGRAF program to achieve fully authorized
functionality.
While using ISaGRAF and the dongle is plugged well, if the
“
Help
”
–
“
About
”
says
“
Maximum
number of IO variables: 32
”
, it means ISaGRAF workbench cannot find the dongle well. Please
reset your PC and then check the
“
Help
”
–
“
About
”
again. If it still displays
“
Maximum number
of IO variables: 32
”
, the driver may not be installed well. Please do the following steps.
Dongle Protection:
Please execute the
\Sentinel5382\setup.exe
for ISaGRAF-80 or
\Sentinel\setup.exe
for other
ISaGRAF version in the ISaGRAF installation folder and then reset the PC again.
USB Key-Pro Protection:
1.
To make your PC recognize the ISaGRAF USB protection-key, please un-plug the USB
protection-key from your USB port first, then run
“
\Sentinel\SSD5411-32bit.exe
”
in the
ISaGRAF installation folder after you have installed the ISaGRAF. Then please reset your PC.
2.
To run ISaGRAF Ver. 3.5x, please always plug the USB protection-key in the PC’s USB port.
1.
2.
