ICP DAS USA I-87211W, User Manual

Page: 75 / 93

I-87211W User Manual
75/93
I-87211W User Manual V2.5, Oct. 2010
2.23 ~AAI
There will be no response if the command syntax is incorrect,
there is a communication error, or there is no module with the
specified address.
Description:
This command enables “Soft INIT” function which cause the
module to temporarily enter initialization mode. The “~AATnn”
(See Section 2.26) command can then be used to set the
duration of the “Soft INIT” mode. During that time, can be
changed the BaudRate and checksum of the module by using
the “%AANNTTCCFF” command (See Section 2.1).
Syntax:
~AAI[CHKSUM](CR)
~ Delimiter character
AA Address of the module in hexadecimal format (00
to FF)
I Command to enable the Soft INIT function
Response:
Valid Command: !AA[CHKSUM](CR)
Invalid Command: ?AA[CHKSUM](CR)
! Delimiter for a valid command
? Delimiter for an invalid command
AA Address of the module in hexadecimal format (00
to FF)