I-8000 Series (C Language Based) User Manual, Version 1.0.1 Page: 26
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
2.1.
Mounting the Hardware
Before you work with I-8000, you should have a basic understanding of the hardware
specifications, such as the dimensions, the usable input-voltage range of the power supply,
and the type of communication interfaces.
For more information about the hardware details, see section 1.2., “Specifications.”
For more information about the hardware dimensions, see section 1.4., “Dimension.”
2.1.1.
Mounting the I-8000
I-8000 can be mounted with the bottom of the chassis in the standard 35 mm DIN rail, or
any other screw-mountable surface. It is necessary that a minimum clearance of 50mm
between the I-8000 and the top and bottom side of the enclosure panels.