ICP DAS USA I-7565, User Manual

Page: 43 / 68

I-7530, I-7530-FT, I-7530A, I-7565
User’s Manual (Version 1.3, Apr/2015) -------- 43
4.8 P1B [CHK]<CR>

Description: Change the CAN configuration of CAN Converter
module. Module will be rebooted after saving these
parameters into EEPROM successfully.

Syntax: P1B[CHK]<CR>
P1 Command character
B CAN Baud rate
Table: CAN baud rate list
B Description
0 10K baud rate of CAN
1 20K baud rate of CAN
2 50K baud rate of CAN
3 100K baud rate of CAN
4 125K baud rate of CAN
5 250K baud rate of CAN, I-7530-FT does not support
6 500K baud rate of CAN, I-7530-FT does not support
7 800K baud rate of CAN, I-7530-FT does not support
8 1000K baud rate of CAN, I-7530-FT does not support
9 83.3K baud rate of CAN, I-7530-FT does not support

Response: A valid command will write the CAN configuration baud
rate into the EEPROM and then reboot the module.
Invalid command: ?<Error Code><CR>

Note:
It is necessary to enable the “Error Response” function in the CAN
Converter Utility, in order to receive Syntax and/or communication
error information at the host PC. This command does not support
user-defined CAN baud rate function.

Example:
Command: P14<CR>
Set the CAN baud rate=125K into the I-7530 module and then
reboot the I-7530 module.