I-7530, I-7530-FT, I-7530A, I-7565
User’s Manual (Version 1.3, Apr/2015) -------- 21
3.1
How to configure and test the CAN converters
Configuration Interface:
Step 1. Before powering on the CAN converters, users must set them
to the Init mode. Users need to switch the Init/Normal DIP-
Switch to Init position described in the section 2.5.1.
Afterwards, power on the CAN converter and the Run LED
indicator will be flashed once per second.
Step 2. Connect the available COM port of the PC to the CAN
converters, and execute the VxCAN Utility.
Step 3. Click the button
to search all CAN devices connected to
the PC.
Step 4. After finishing the search, the CAN converters (for example
tM-7530 and I-7530) which are connecting to the PC or have
connected to the PC will be list in the left side of the VxCAN
Utility. If the tM-7530 is in Init mode, the VxCAN utility shows
the
“Init” information in the list.
