ICP DAS USA I-7242D User Manual Download Page 21

Page: 21 / 124

I-7242D user manual

I-7242D DeviceNet/Modbus RTU Gateway User’s Manual, July 2006, Version 1.1 21/124

There are two examples of the 7-Segment LED displays in the active status.

Example1:

Example 2:

Step1. Display the string “-DEV-”

Step2. It means that I-7242D is in
the normal operation mode. Its
MAC ID is 0x01. CAN baud rate is
125Kbps and RS-485 baud rate is
9600bps.

Step3. It means that no error
occurs in Modbus communication.

Step1. Display the string “-DEV-”

Step2. It means that the I-7242D
is in the normal operation mode.
Its MAC ID is 0x03. CAN baud
rate is 125 Kbps and RS-485
baud rate is 115.2 Kbps.

Step3. It means that there is one
message lost from I-7242D to
Modbus device which device
address is 0x01. The number
format is hex.

Summary of Contents for I-7242D





























































































































Search results

Summary of Contents for I-7242D

Reviews:

Related manuals for I-7242D

Brands by name

Popular brands

ICP DAS USA I-7242D, User Manual

Search results

Summary of Contents for I-7242D

Reviews:

Related manuals for I-7242D

Brands by name

Popular brands