ICP DAS USA I-7188XBD-CAN User Manual Download

Page: 2 / 4

I-7188XBD-CAN I-7188 CAN bus series PAC - QuickStart (Feb/2017)

ICP DAS USA, Inc.

www.icpdas-usa.com

| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

2. Terminal Resistor Jumper Selection

Remove the cover of the I-7188XBD-

CAN/μPAC

-7186EXD-CAN. Users can see the

part of internal structure shown as following figure. The XC100 provides users one

jumper-selected termination resistor (J3). Its position is displayed below.

The jumper J3 is used to judge the resister of CAN network. When users want to set the
jumper JP3, the upper cover of I-7188XBD-

CAN/ μPAC

-7186EXD-CAN needs to be

removed. About the J3 jumper setting, please refer the following figure

Summary of Contents for I-7188XBD-CAN

Page 1: ...em provide several communication interfaces to adapt to various applications such as CAN port RS 232 port and RS 485 port Uses can program their application program flexibly with C C language because...

Page 2: ...XBD CAN PAC 7186EXD CAN Users can see the part of internal structure shown as following figure The XC100 provides users one jumper selected termination resistor J3 Its position is displayed below The...

Page 3: ...ogram Please refer section 4 of user manual for more detail information The following figure shows the wiring diagram for general application When the COM1 of I 7188XBD CAN is used sending data to COM...

Page 4: ...4 Moreover in order to wire conveniently the I 7188XBD CAN provides not only one CAN port but also another bypass CAN port There two CAN ports are the same one The bypass CAN port is just for wiring w...