ICP DAS USA HRT-710, User Manual

Page: 41 / 104

HRT-710 User Manual (Version 1.24, June/2015) PAGE: 41
System click
Module name: System
[ System: ]
Module count : 0~16
Command count : 0~100
Command interval (ms) : 75~65535
Command timeout (ms) : 305~65535
Auto Polling : Enable/Disable
Retry count : 0~5
[ Modbus: ]
Port num : 0~3
Baud rate (bps) : 1200~115200
Data bits : 7/8
Stop bits : 1/2
Parity : None/Odd/Even
Protocol : Modbus RTU Slave /
Modbus ASCII Slave
Net ID
: 1~247
Swap mode : None, Byte, Word, W&B
System right click
Include the below two options :
1. Basic Operation:
Read/Write module information by using
window option.
2. Advanced Operation:
Read/Write module information by using
address mapping.
Module click
Module name : Module
Channel : 0
Auto Configuration : Enable/Disable
Network : Point to Point / Multi-drop
(Preamble length : 5~20)
(Master type : Primary/Secondary Master)
(Frame type : Short/Long Frame)
(Module address : 0~15)
(Auto Get Unique ID : Enable/Disable)
(Manufacturer ID : 1 byte)
(Device type : 1 byte)
(Device ID : 3 bytes)
Default Command(0) : Disable/Initial/Polling
Default Command(3) : Disable/Initial/Polling