GW-7552-B / GW-7552-M PROFIBUS/MODBUS GATEWAY User Manual
(Version 1.60, May/2017)
PAGE: 63
The window of “Safe Value Setting” divided into 6 parts to explain, as shown in
figure 61
.
(1) Select module:
The user can select check box of the module to know memory address
configuration of the module for set safe value of the module.
(2) DI/O table:
The user can double click left button of mouse at the value of DI/DO to change
the value from “H” to “L” or “L” to “H”.
(3) All DI/O setting:
The user can click “All set to H” button to set all of DI/DO to “H” and click “All
set to L” button to set all of DI/DO to “L”.
(4)AI/O table:
The user can double click left button of mouse at the value of AI/AO to change
the value into 0000~FFFF.
(5) All AI/O setting:
The user can click “All set to F” button to set all of AI/AO to “FFFF” and click
“All set to 0” button to set all of AI/AO to “0000”.
(6) Display and Save interface
The user can click “Output” button to show safe value setting of DO/AO, click
“Input” button to show safe value setting of DI/AI, click “Save to File” button to
open “save file dialog” to save safe value setting for backup, click “Save to
Device” button to save safe value setting to EEPROM of the GW-7552-B / GW-
7552-M.
