GPS-721 User Manual
81/98
GPS-721 User Manual V2.0, Oct. 2010
2.26
~AATnn
Description:
This command is used to set the “Soft INIT” duration. The
command “~AAI” must be send to set the module to “INIT”
mode before using this command (See Section 2.23). The
BaudRate and checksum can then be changed using the
“%AANNTTCCFF” command (See Section 2.1).
Syntax:
~AATnn[CHKSUM](CR)
~
Delimiter character
AA
Address of the module in hexadecimal format (00
to FF)
T
Command to set the Soft INIT duration
nn
Two hexadecimal digits that represent the
Soft INIT duration
The maximum duration is 60 seconds
Example: a value of 10 = 16 seconds
Response:
Valid Command:
!AA[CHKSUM](CR)
Invalid Command: ?AA[CHKSUM](CR)
!
Delimiter for a valid command
?
Delimiter for an invalid command
AA
Address of the module in hexadecimal format (00
to FF)
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
