GPS-721 User Manual
24/98
GPS-721 User Manual V2.0, Oct. 2010
3. Configure the module by sending the %AANNTTCCFF
command. See Section 2.1 for details.
ICP DAS provides two free tools, the DCON Utility and
Send232.exe, witch can be downloaded from
http://ftp.icpdas.com/pub/cd/8000cd/napdos/
4. You can implement the functions of the modules using the
following DCON commands. Please refer to chapter 2.
5. If the host is a PC with a Windows operating system installed, the
DCON Utility can be used to allow easy configuration and
reading of data. The DCON Utility can be downloaded from the
ICP DAS website (http://www.icpdas.com). The documentation
for the DCON Utility can be found in the ”Getting Started For
I-7000 Series Modules” manual.
Note 1: The DCON Utility is provided for sending commands to the
GPS-721. The graphic setting of the GPS-721 is not
supported by the DCON Utility.
Note 2: If GPS-721 can’t receive a GPS signal, check the position
of the antenna and if the problem persists, try installing the
GPS antenna outside.
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
