18
Q16: When I cannot use the EIP-2000 Utility to scan the button, how can I configure or test the
connection of the EIP-2000 module?
A16
：
After the EIP-2000 Utility v330 version, the function of direct connection to the EIP-2000 module
will be provided. Users can directly input the IP address of the EIP-2000 module for setting and
connection testing, without closing the firewall and Antivirus software to scan the connection
information of the EIP-2000 module.
Q17: I can’t measure the current value when I change EIP-2017 to the Single-Ended mode. What
can I do?
A17
：
The external resistor is required. Please check the wire-connection and its internal jumpers.
(1) The jumper is in the SE mode.
(2) Because of the external resistor, all the channel jumper is in voltage mode.
