DL-100S-E / DL-101S-E / DL-110-E / DL-120-E User Manual Version 1.0.0 May 2020
- 51 -
Q3: How to clear the data logged in a DL-100S-E module?
A3: Enter the IP address for the module in the address bar of a web browser and go to
the
I/O Settings
page, click the Reset Data Logger button at the bottom of the page.
Q4: How to download firmware into a DL-101S-E module?
1.
Setting up the DL-101S-E
Before updating the firmware, ensure that the network settings for both your
host computer and any DL-101S-E modules are correctly configured, or the
update procedures via the Ethernet network may not function correctly.
Step 1: Download and Install the eSearch Utility (version is v1.1.14 or later) on your
Host PC, and then run the Utility to search for DL-101S-E modules connected to
the network.
Download and install the eSearch utility.
http://ftp.icpdas.com/pub/cd/iiot/utility/esearch/
Run the eSearch utility. Click on the Search Server button and it should find the
DL-101S-E module.
