BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 59
Send data to peer device
Only the Broadcast can send the packet to the peer device. This feature will disable when
the module is the Observer. You need to set the packet in the textbox and click the “Set
Packet” button to send the packet. It will appear an information message after you click
the button, and then the Broadcast will start sending the packet with timer interval. You
also can pause or resume the packet.
Figure 4-29. Set the packet
Figure 4-30. Information message
Module Configuration
The utility will load the module configuration when the “Open Port” had clicked. It will
print the broadcast role, broadcast channel, broadcast interval, group ID and address to the
textbox. In addition, you can click the “Read Advertiser Information” button; It will show
the status of peer device.
Figure 4-31. Module
Configuration
Figure 4-32. Read button
Figure 4-33. status of peer device
Receive Data
When the module was received data from the Broadcaster. It will print the data to the
textbox.
