BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 29
3.1.15
AT+SDN
(1)
Description
This command can set the device name of slave when the slave was broadcast in the
connection mode. The master (mobile device) can use the device name to identify slave.
Figure 3-2. Screenshot of mobile device APP
(2)
Syntax
Write Command
Response
AT+SDN=
<number>
<CR>
OK<CR>
Error: 01<CR><LF> (refer to
Read Command
Response
AT+SDN?<CR>
+SDN:
<number>
<CR><LF>
OK<CR><LF>
Test Command
Response
AT+SDN=?<CR>
+SDN: 0~999<CR><LF>
OK<CR><LF>
(3)
Parameter
<number>
The number of device
Range: 0~999
Default: 720
Device name
