BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 53
Send Mode: transmission mode of BLE-USB (refer to
RF power level: the RF power level (refer to
Figure 4-9. Other parameter setting
Step6
The step 6 is final step in the basic parameter setting page. You can save the configuration
by “Save Configuration” button, but it need select a store path before you click “Save
Configuration” button. Please click the “Upload Setting” to upload the configuration into
the BLE-USB. The utility will show an information message after the configuration was
done. The BLE-USB will automatically restart by itself after the configuration uploaded
complete. The utility will show an error message that the configuration had uploaded fail.
Please re-power on the BLE-USB, and back to the step 1.
Figure 4-10. Upload complete
Figure 4-11. Upload fail
