22
Icotera A/S, Vibeholms Allé 16, 2605 Brøndby, Denmark - [email protected]
Document version: 1.0
User Guide for 1.17.3 Firmware
Managing LEDs behaviour
LEDs behaviour can be controlled from under the
LEDs
item of the
Administration
menu:
•
LEDs
: preferred LEDs behaviour:
*
turn on
: LEDs remain turned on all the time,
*
turn off - LEDs will be turned on again only if an event occurs
: LEDs remain turned off except in case of
an event,
*
turn off - LEDs will be turned on again only if an error occurs
: LEDs remain turned off except in case of
an error,
*
always off - LEDs will be off after system will be up
: all LEDs are off after system is booted up.
•
LEDs’ brightness
: preferred LEDs brightness level:
*
high
: LEDs are visible in daylight,
*
medium
: LEDs are barely visible in daylight,
*
low
: LEDs are visible in darkness but not in daylight.
Figure 26.
LEDs
item of the
Administration
menu
Managing remote access
The
Remote Access
item of the
Administration
menu allows to configure access to the router from a WAN interface.
Figure 27.
Remote Access
item of the
Administration
menu
•
HTTPS setting
:
*
Enable
: enables or disables HTTPS protocol on a given port.
*
Port
: port number (default is 443).
•
Remote access from Internet
:
*
Enable
: enables or disables operator’s filters. This option can be checked only if HTTPS is enabled.
*
Public URLs
: the URL of Web UI accessible from public Internet.
Remote access setting can be restored to default configuration with the
Reset
button, confirmed with the
Save
button or introduced with the
Apply
button.
Managing services
The
Services
menu provides configuration options for controlling port forwarding, DMZ, ALG, parental control
settings, Wake-on-LAN function, DDNS, UPnP, NAT type and IPv6 firewall.
Port forwarding
Port forwarding rules can be configured under the
Port forwarding
item of the
Services
menu.
By default all rules are disabled and inactive. In order to fill the fields of a chosen rule first mark its checkbox.
