iCool Turbo Dual Temp Installation & Operation Manual Download Page 8 | Manualshive

Page: 8 / 18

iCool Turbo Dual Temp Installation & Operation Manual Download Page 8

Page 8

Installation:

Remote Control Touch Screen Option:

TurboCools are supplied either with a Touch Screen integrated into the front panel of the
machine, or ready wired for either single or double screen remote control panel.

If you ordered a Remote Touch Screen
Panel, your Turbo will have a special
multi pin cable socket on the top right
hand side at the back. Once the cable
provided with the remote panel is
plugged into this socket, all functions are
then controlled from the remote screen
and all temperature and systems data is
displayed on the remote screen.
The Remote panel is supplied with whatever length of data cable you require. If iCool is
installing your TurboCools the data cable may be directly wired instead of via a plug.

A Twin Remote Touch Screen Installion

Rear of Cabinet

STEP 1 Remove the 4 screws on the side of the box

STEP 2 Carefully move the front panel away from the back panel until you can see the 3 cables that you must unplug
in order to mount the back panel to a wall.

STEP 3 Unplug the 3 cables as shown so that the front can be separated from the rear panel.

STEP 4 The rear panel has several holes that can be used for screwing to a wall. Select a good position where the
screen can be easily reached by operators and can be seen from the recovery spa.

STEP 5 Replace the 3 plugs as shown.

Push the screen power plug number 2 firmly into the screen so that it does not come loose.

Take care when replacing plug number 1, the data cable for the screen, it has several small pins that must line up
correctly.

STEP 6 Replace the front panel, check that the cable from the screen box is plugged in to the TurboCool and test
that all operations are normal.

Mounting Your Remote Control Touch Screen on a Wall:

Most iCool users find that it is very

convenient to have the remote touch screen mounted within the spa pool area for ease of operation so that the
information on the screen such as temperatures, operation functions and the session timer can be easily seen.
If you chose this option the remote cabinet can be mounted as shown below.

«
...
6
7
8
9
10
...
»

Summary of Contents for Turbo Dual Temp



















Reviews:

No comments