Page 15
Set Main Clock
To set the clock touch the
”Set Main Clock”
button on the timing functions screen and the time setting
display on the bottom right of the screen will begin flashing. You must set each number while it is flashing
by using the up down and left right keys. Once you stop using these keys for more than a few seconds
the display will stop flashing and the time showing is automatically set into the system and the clock
begins operating.
The iCool clock operates in the universal 24-hour time style.
Set Count down
This allows you to accurately control the immersion times of athletes and to repeat those times as often
as needed. This is an essential part of successful cryo recovery therapy and is just as important as
maintaining accurate and consistent temperatures, which of course your iCool does perfectly.
The session timer is set by touching the
”Set Count down”
button. The numbers on the setting screen in
the bottom right-hand corner are minutes and seconds. They will begin to flash and you can use the left,
right and up, down arrows to change the minutes and seconds. Once you have
set the time you want your athletes to remain in the bath, touching the
”Display
Countdown Full Screen”
button will take you to the main session timer
screen screen illustrated below. This screen allows you to see the countdown
from a distance and also to control it in various convenient ways. The current
pool and outside temperature will also be displayed.
The count down can be set for once only, or it can repeat automatically as
many times as you like. This is particularly convenient if you have a number of athletes using the same
pool at the same time. The system beeps for each of the last five seconds at the end of each countdown
to warn the athletes to get ready to get either in or out of the pool and pauses for several seconds to allow
the changeover before the countdown begins again.
Touch Screen Session Timer and Clock Functions.
11:25
Your iCool offers a number of very useful timing functions including a real-time clock, a countdown timer
to time your recovery and training sessions and a timer to shut down the system automatically after use.
To set up and use these functions touch the
“Timer”
button on the HOME screen.
Clock Control Screen
Session Timer Screen
This button starts the countdown
When this button is pressed the countdown will repeat
until the repeat function is cancelled by pressing once
again. A red dot indicates that it is active
Resets time to the preset value in the single shot
mode, ready to start again by pressing the
“START”
button
You can pause the countdown at
any time and start again from the
same position with this button, or
touch reset to start from the top.
1:25
15
25