ICONE Pure, Instruction Manual For Use

Page: 11 / 24

If you do not use the electric bike for more than 5 minutes, the display will turn off automatically.
Adjust the speed as necessary and with the + and - buttons.
It is recommended to start slowly and then increase according to road conditions
and traffic.
Indications on the e-Bike display:
Power switch
Adjusting the change/Adjusting the par
Adjusting the change/Setting the parameter -
Displaying electric charge
LED floodlight: turn on the light
Error code
Total mileage
Partial mileage
Overall mileage
5. USE OF YOUR E-BIKE
5.1 TROUBLESHOOTING
PROBLEMES POSSIBLE CAUSES SOLUTIONS
Set the switch to ON,
the indicator light does not
light up, the motor does not
work, there is no electricity
in the e-Bike.
1. The battery is completely empty.
2. The electrical connection cable
of the battery is loose.
3. The fuses are burned.
1. Charge the battery.
2. Adjust the cable.
3. Change the fuses.
1. Charge the battery completely.
2. Change the battery.
3. Use more physical pedaling.
1. Insert the cable appropriately.
2. Change the fuses.
3. Change the charger.
Contact the local seller
or at the service center for help.
1. Insufficient battery capacity.
2. The battery is running out.
3. Brake continuously, pedal uphill
or upwind.
1. The connection cable is loose.
2. Fuses are burned.
3. The charger is damaged.
Any problem with electrical
components
The indicator light does not
come on during charging.
Other issues
The travel distance
decreases.