ICONE Pure, Instruction Manual For Use

Page: 10 / 24

POWER ON:
Turn on the switch (turn the key to ON) the display will light up when connected.
EPAC/PEDELEC:
Just like normal bicycles, position the bike and get onto the saddle, place one foot on the pedal
and start pedaling after ensuring that everything is OK. Once the speed is reached during the
ride, the engine will automatically activate and start working and moving your e-Bike. To stop the
engine, stop pedaling and the engine will stop automatically. To stop the e-Bike use the brakes. The
brakes have the function of interrupting the operation, if both levers are activated, the power will be
interrupted automatically and the engine will stop.
ASSISTED POWER VARIATION (VPA):
In case of problems with acceleration, you should have received or chosen a potentiometer. This
installation is only compatible with e-Bike with Pedal Assist. The potentiometer configuration
provides three different levels of assisted power during pedaling that coincides with the different
road surface conditions. It is very useful during a long journey.
CALIBRATE THE BATTERY LEVEL:
When the battery is running low, the lights will weaken (the lights will go out one by one) at this
point you have to turn off the switch and use the pedals like a regular bicycle. You must recharge
the battery when you are near a power outlet so that the Assisted Pedaling can be used again.
PARKING AREA:
Switch off and remove the key from the battery while parking. Make sure that the switch is set to
OFF so as not to start the engine accidentally. We recommend using a lock to protect your e-Bike
if necessary.
WARNING!
Frequent use of the brakes, turning the e-Bike on and off repeatedly, pedaling upwind, uphill,
or carrying a lot of weight can affect battery life, compromising the duration and time of travel.
BENDING METHOD:
• Remove the lifting handle.
• Release the safety clip ring.
• Open the folding handle and fold the upper end down
• Adjust the position.
The folding method of the frame is the same.
Add lubricating oil to the frame folding device often.
3. RIDING
4. BENDING AND METHODS OF USE