15
14
G
I
13
7
13
7
80
72
72
15. Attach the Pulse Crossbar (75) to the console
assembly (G) with four #8 x 3/4" Screws (11);
start all four Screws, and then tighten them
.
Do not overtighten the Screws.
Firmly tighten the four 5/16" x 3/4" Screws
(13).
15
G
13
75
11
11
13
14. Set the console assembly (G) on the Handrails
(72).
Make sure that no wires are pinched.
Insert the excess Upright Wire (80) into the con-
sole assembly (G). Next, tighten the two ties (I)
around the Upright Wire, and cut off the ends of
the ties.
Then, attach the console assembly (G) with the
four 5/16" x 3/4" Screws (13) that you removed
in step 11 and four 5/16" Star Washers (7);
do
not tighten the Screws yet.
