background image

8

6.  Orient the Console Plate (11) as shown. Then, 

insert the Main Wire (53) and the Frame Pulse 

Wire (42) upward through the Console Plate. 

  Tip: Avoid pinching the wires. Insert the 

Console Plate (11) into the Upright (2). 

  Orient the Handlebar (13) as shown. Tip: Avoid 

pinching the wires. Attach the Handlebar and 

the Console Plate (11) to the Upright (2) with two 

M8 x 20mm Screws (55).

Avoid pinching 

the wires

53

42

13

55

11

2

4

Battery 

Cover

7

7.  The Console (4) can use four D batteries (not 

included); alkaline batteries are recommended. 

Do not use old and new batteries together or 

alkaline, standard, and rechargeable batter-

ies together. IMPORTANT: If the Console has 

been exposed to cold temperatures, allow 

it to warm to room temperature before you 

insert batteries. Otherwise, you may dam-

age the console displays or other electronic 

components. 

  Remove the battery covers from the back of the 

Console (4), and insert batteries into the battery 

compartments. Make sure to orient the bat-

teries as shown by the diagrams inside the 

battery compartments. Then, reattach the bat-

tery covers.

  To purchase an optional power adapter, call 

the telephone number on the cover of this 

manual. To avoid damaging the console, 

use only a manufacturer-supplied power 

adapter. Plug one end of the power adapter into 

the receptacle inside the battery compartment 

on the console; plug the other end into an outlet 

installed in accordance with all local codes and 

ordinances.

Battery 

Cover

Receptacle

6

Summary of Contents for Pro-Form 425 ZLX PFEVEX74012.0

























Reviews: