background image

12

HOW TO USE THE EXERCISE BIKE

HOW TO ADJUST THE SEAT

The seat can be 

adjusted forward 

or backward to the 

position that is the 

most comfortable. To 

adjust the seat, push 

downward on the 

adjustment handle, 

slide the seat to the 

desired position, and 

then pull upward 

on the adjustment 

handle to lock the 

seat in place.

HOW TO ADJUST THE PEDAL STRAPS

To adjust the pedal 

straps, first pull the 

ends of the straps off 

the tabs on the ped-

als. Adjust the straps 

to the desired posi-

tion, and then press 

the ends of the straps 

onto the tabs.

HOW TO MOVE THE EXERCISE BIKE

To move the exercise 

bike, hold the handle 

on the rear stabilizer 

and carefully lift it 

until the exercise 

bike can be moved 

on the front wheels. 

Carefully move the 

exercise bike to the 

desired location and 

then lower it.

HOW TO LEVEL THE EXERCISE BIKE

If the exercise bike 

rocks slightly on your 

floor during use, turn 

one or both of the 

leveling feet on the 

rear stabilizer until 

the rocking motion is 

eliminated.

Tab

Handle

Leveling 

Feet

Adjustment 

Handle

Summary of Contents for Pro-Form 425 ZLX PFEVEX74012.0

























Reviews: