ICON PRO-FORM 300 CR User Manual Download Page 5

Page: 5 / 24

M10 x 63mm Bolt Set (62)–1

M8 x 55mm Patch

Screw (52)–4

M6 x 42mm Patch

Screw (51)–2

M8 x 38mm Button

Bolt (72)–4

M8 x 16mm Patch

Screw (54)–6

M8 Split

Washer (55)–10

M6 Washer

(44)–4

M6 x 38mm Patch

Screw (81)–4

M8 Locknut

(61)–4

M10 Locknut

(64)–2

M6 x 18mm Patch

Screw (77)–2

M10 x 32mm

Button Bolt (78)–2

M4 x 16mm Flange

Screw (80)–4

ASSEMBLY

To hire an authorized service technician to assemble the exercise bike, call 1-800-445-2480.

Assembly requires two persons.

Place all parts of the exercise bike in a cleared area and remove the packing

materials. Do not dispose of the packing materials until assembly is completed.

In addition to the included tool(s), assembly requires a Phillips screwdriver

and an

adjustable wrench

See the drawings below to identify the small parts needed for assembly. The number in parentheses below each

drawing is the key number of the part, from the PART LIST near the end of this manual. The number following

the key number is the quantity needed for assembly.

Note: If a part is not in the hardware kit, check to see if

it has been preassembled. To avoid damaging parts, do not use power tools for assembly.

All manuals and user guides at all-guides.com

Summary of Contents for PRO-FORM 300 CR

























Search results

Summary of Contents for PRO-FORM 300 CR

Reviews:

Related manuals for PRO-FORM 300 CR

Brands by name

Popular brands

ICON PRO-FORM 300 CR, User Manual

Search results

Summary of Contents for PRO-FORM 300 CR

Reviews:

Related manuals for PRO-FORM 300 CR

Brands by name

Popular brands