ICON NordicTrack EXP10i, User Manual

Page: 25 / 40

25
7. Calibrate the incline system.
To calibrate the incline system, touch Maintenance,
touch Calibrate Incline, and then touch Begin. The
frame will automatically rise to the maximum incline
level, lower to the minimum incline level, and then
return to the starting position. This will calibrate
the incline system. When the incline system is
calibrated, touch Finish.
IMPORTANT: Keep pets, feet, and other objects
away from the treadmill while the incline sys-
tem is calibrating. In an emergency, remove
the key from the console to stop the incline
calibration.
Note: The incline system may occasionally
calibrate automatically when you turn on the
treadmill. Wait for the frame to stop moving
before you attempt to use the treadmill.
8. Exit the settings main menu.
To exit the settings main menu, touch the back
button (arrow symbol).
HOW TO CONNECT TO A WIRELESS NETWORK
To use iFIT workouts and to use several other features
of the console, the console must be connected to a
wireless network.
1. Select the home screen.
First, turn on the console and insert the key into the
console (see HOW TO TURN ON THE CONSOLE
on page 17). Note: It may take up to a few min-
utes for the console to be ready for use.
Next, select the home screen (Home button). When
you turn on the console, the home screen will
appear after the console boots up. If a workout is
selected, touch the screen and follow the prompts
to end the workout and return to the home screen.
If a settings menu is selected, touch the back but-
ton (arrow symbol) to return to the home screen.
2. Select the wireless network menu.
Touch the menu button (three horizontal lines
symbol) and then touch Wi-Fi to select the wireless
network menu.
3. Enable Wi-Fi
®
.
Make sure that Wi-Fi is enabled. If it is not enabled,
touch the Wi-Fi toggle to enable it.
4. Set up and manage a wireless network
connection.
When Wi-Fi is enabled, the screen will show a
list of available networks. Note: It may take a few
moments for the list of wireless networks to appear.
Note: You must have your own wireless network
and an 802.11b/g/n router with SSID broadcast
enabled (hidden networks are not supported).
When a list of networks appears, touch the desired
network. Note: You will need to know your network
name (SSID). If your network has a password, you
will also need to know the password.
Follow the prompts on the screen to enter your
password and connect to the selected wireless
network. (To use the keyboard, see HOW TO USE
THE TOUCH SCREEN on page 17.)
When the console is connected to your wireless
network, a confirmation message will appear on the
screen.
If you are having problems connecting to an
encrypted network, make sure that your password
is correct. Note: Passwords are case-sensitive.
Note: The console supports unsecured and
secured (WEP, WPA™, and WPA2™) encryption.
A broadband connection is recommended; perfor-
mance depends on connection speed.
Note: If you have questions after follow-
ing these instructions, go to my.iFIT.com for
assistance.
5. Exit the wireless network menu.
To exit the wireless network menu, touch the back
button (arrow symbol).