11
6
6. Identify the Right Handrail Cover (75). Insert the
front edge of the Right Handrail Cover into the
top of the handrail assembly (D) on the right side
of the treadmill as shown. Then, press down on
the top of the Right Handrail Cover until it snaps
into place.
Attach the Left Handrail Cover (74) to the left
side of the handrail assembly (D) in the same
way.
D
74
75
7
7. Do not pinch the wires (F, G, H, 83, 98) dur-
ing this step. Attach the console assembly (E)
to the handrail assembly (D) with four 5/16" x
1" Screws (4) and four 5/16" Star Washers (7);
start all four Screws, and then tighten them.
Next, connect the Handrail Wire (83) and the
primary console wire (F) to the matching console
wires (G). IMPORTANT: The wire connectors
should slide together easily and snap into
place with an audible click. If they do not,
turn one connector and try again.
Then, connect the two Ground Wires (98, H).
83
4
7
7
F
H
D
E
G
98
4
Summary of Contents for NordicTrack EXP10i
Page 5: ...5...
