ICON ATV08, User Manual

Page: 23 / 32

ICON EV Manual Use and maintenance ATV08 23
Routine inspection of
electric bike before use
1. Install the battery box in the slot
of the battery box, open the
power supply switch and check
whether the functions of all the
electrical appliances are normal.
2. Safety inspection (see the notes
to safe use in the Manual)
3. Check whether the governor
switch handle rotates and is
reset flexibly.
4. Check whether the braking
power-off function and braking
effect are in good condition (dry
braking distance 4m, wet braking
distance 15m).
5. We advise against performing
maintenance operations that
involve removing parts or
components. If necessary, please
contact your Authorized Dealer’s
Customer Service.
WARNING:
1. As with all mechanical components, the bicycle is subjected
to wear and high stresses. Different materials and
components may react to wear or stress fatigue in different
ways. If the design life of a component has been exceeded,
it may suddenly fail possibly causing injuries to the rider. Any
form of crack, scratches or change of colouring in highly
stressed areas indicate that the life of the component has
been reached and it should be replaced.
2. Danger of wheel failure due to rim Wear Replace wheel when
any part of the Rim Wear Groove is not visible.
Notes about the battery and charger
Battery
• Never short circuit the discharge or charge terminals of
the battery.
• Never charge the battery by discharge terminals or discharge
the battery by charge terminals.
• Keep off the battery from fire and excessive heat.