ICON ATV08, User Manual, Page: 12 / 32

ICON EV Manual Assembly method and requirements ATV08 12
Assembly requirements
In order to ensure the cycling safety and using
performance, the fastening requirements for the
standard parts at the key places are as follows:
a. The tightening torque of the front wheel nut is
not less than 18N.m
b. The tightening torque of the rear motor nut is
35 to 45N.m
c. The tightening torque of the middle axis
component lock is not less than 50N.m
d. The tightening torque of the core screw rod in
the Vertical handle stems is 15 to 18N.m
e. The tightening torque of the Across handle
Stems and the Vertical handle stems is 15
to 18N.m
f. The tightening torque of the saddle pipe ring
is 6 to 8N.m
g. The tightening torque of the saddle and the
Seat post ring is 15 to 18N.m
h. The tightening torque of the Brake handle is
not less than 10 to 12N.m
i. The tightening torque of the Derailleur is 8
to 10N.m