background image

ASSEMBLY

•  Assembly requires two persons.

•  Place all parts in a cleared area and remove the 

packing materials. Do not dispose of the packing 

materials until you finish all assembly steps.

•  Left and right parts are marked “L” or “Left” and “R” 

or “Right.”

•  To identify small parts, see page

 17

•  As you assemble the exercice bike, use the draw-

ings below to identify small parts. The number in 

parentheses below each drawing is the key number 

of the part, from the PART LIST near the end of this 

manual. The number following the parentheses is 

the quantity needed for assembly. 

•  In addition to the included tool(s), assembly requires 

the following tools:

•  one adjustable wrench 

•  one Phillips screwdriver 

•  Note: If a part is not in the hardware kit, check to 

see if it has been preassembled.

Go to www.iconservice.ca/CustomerService/ 

registration and register your product.

  •   activates your warranty
 

•   saves you time if you ever need to contact Customer 

Service

  •   allows us to notify you of upgrades and offers

   Note: If you do not have internet access, call Customer 

Service (see the front cover of this manual) and register 

your product.

Summary of Contents for WESLO CITY BI


















Reviews: