12
11
10
E
Avoid
pinching
the wires
10.
Tip: This step may be easier if you lay the
Console (6) facedown on a soft surface.
With the help of a second person, hold the
Console Mount (5) near the Console (6).
Remove the indicated wire tie (E) from the
Console Mount (5). Next, connect the Mount
Wire (91) to the console wires (F).
Tip: The wire
connectors should slide together easily and
snap into place with an audible click. If they
do not, turn one connector and try again.
Then, insert the connectors into the Console
Mount (5).
Tip: It may be easier to insert the
connectors one at a time.
11.
Tip: Avoid pinching the wires. If necessary,
tilt the Console Bracket (26) upward to make
this step easier.
Attach the Console (6) to the
Console Bracket with four M4 x 12mm Machine
Screws (81);
start all the Machine Screws, and
then tighten them.
5
6
F
91
6
26
81
81
Summary of Contents for Pro-Form Studio Bike Pro 22
Page 4: ...4 STANDARD SERVICE PLANS...