8
4. Tip: Avoid pinching the Upper and Lower
Wires (6, 98).
With the help of a second person, attach
the Upright (4) to the Frame (1) with three
M8 x 72mm Screws (72); start all the Screws,
and then tighten them.
Then, connect the Upper Wire (6) in the Upright
(4) to the Lower Wire (98) in the Frame (1).
Insert the excess wire into the Frame.
4
4
6 98
72
Avoid pinching
the Upper and
Lower Wires
(6, 98)
1
34
99
74
71
86
74
2
1
3
3. Place some of the packaging materials under the
rear of the Frame (1). Have a second person
hold the Frame to prevent it from tipping.
Attach the Base (2) to the Frame (1) with two
M10 x 70mm Screws (86) and two M10 x 45mm
Screws (71); do not fully tighten the Screws
yet.
Finish attaching the Base (2) to the Frame (1)
with two M10 x 20mm Screws (74).
Then, fully tighten all the Screws (71, 74, 86).
Next, attach the Foot (34) to the underside
of the Frame (1) with two M4 x 19mm Flange
Screws (99).
Then, remove the packaging materials from
beneath the Frame (1).
