11
68
56
56
55
64
18
17
10
10. See the inset drawing. Identify the Crank
Caps (56), which are larger than the
Leg Caps (55).
Attach the Right Pedal Leg (18) to the right
Crank Arm (39) with an M8 x 16mm Screw
(68), a Crank Cap (56), and an M8 x 32mm
Washer (64).
Repeat this step to attach the Left Pedal
Leg (17).
39
18
17
9
9. If there is a wire tie (not shown) in the Right
Pedal Leg (18), remove and discard it.
Slide the Right Pedal Leg (18) onto the right
Crank Arm (39); make sure that the Pedal Leg
Sleeve Bushing (59) remains inside the Right
Pedal Leg.
Repeat this step for the Left Pedal Leg (17).
39
59
