12
9
10
9. Have a second person hold the Console (3) near
the Upright (2).
Plug the Upper Wire (81) into the large
receptacle on the back of the Console (3). Next,
plug the Right and Left Pulse Wires (80, 85)
into the right and left receptacles. The connec-
tors on the Wires should slide easily into the
receptacles and snap into place. If a connec-
tor does not slide easily, turn it and try again. If
you do not insert the connectors properly, the
Console may become damaged.
Next, insert the excess wire into the Upright (2).
Tip: Avoid pinching the wires. Attach
the Console (3) to the Upright (2) with four
M4 x 16mm Screws (67); start all the Screws,
and then tighten them.
10. Hold the Rear Upright Cover (21) against the
Console (3).
See step 8. Tighten the five M4 x 16mm
Screws (67).
Press the tabs on the Front Upright Cover (20)
into the Rear Upright Cover (21). Then, attach
the Front Upright Cover to the Upright (2) with an
M4 x 16mm Screw (67).
3
3
2
67
67
20
80
85
Avoid pinching
the wires
81
2
21
Summary of Contents for PRO-FORM 16.0 MME
Page 4: ...4...
