background image

3

    WARNING:

 To reduce the risk of serious injury, read all important precautions and 

instructions in this manual and all warnings on your elliptical before using your elliptical. ICON 

assumes no responsibility for personal injury or property damage sustained by or through the 

use of this product.

1.  It is the responsibility of the owner to ensure 

that all users of the elliptical are adequately 

informed of all precautions.

2.  Before beginning any exercise program, 

consult your physician. This is especially 

important for persons over age 35 or persons 

with pre-existing health problems.

3.  The elliptical is not intended for use by 

persons with reduced physical, sensory, or 

mental capabilities or lack of experience and 

knowledge, unless they are given supervi-

sion or instruction about use of the elliptical 

by someone responsible for their safety.

4.  Use the elliptical only as described in this 

manual. 

5.  The elliptical is intended for home use only. 

Do not use the elliptical in a commercial, 

rental, or institutional setting.

6.  Keep the elliptical indoors, away from mois-

ture and dust. Do not put the elliptical in a 

garage or covered patio, or near water. 

7.  Place the elliptical on a level surface, with at 

least 3 ft. (0.9 m) of clearance in the front and 

rear of the elliptical and 2 ft. (0.6 m) on each 

side. To protect the floor or carpet from dam-

age, place a mat under the elliptical.

8.  Inspect and properly tighten all parts each 

time the elliptical is used. Replace any worn 

parts immediately.

9.  Keep children under age 13 and pets away 

from the elliptical at all times.

10. The elliptical should not be used by persons 

weighing more than 350 lbs. (159 kg).

11. Wear appropriate clothes while exercising; 

do not wear loose clothes that could become 

caught on the elliptical. Always wear athletic 

shoes for foot protection while exercising.

12. Hold the handlebars or the handrails 

when mounting, dismounting, or using the 

elliptical.

13. The heart rate monitor is not a medical 

device. Various factors may affect the accu-

racy of heart rate readings. The heart rate 

monitor is intended only as an exercise aid in 

determining heart rate trends in general.

14. The elliptical does not have a freewheel; the 

pedals will continue to move until the fly-

wheel stops. Reduce your pedaling speed in 

a controlled way.

15. Keep your back straight while using the ellip-

tical; do not arch your back.

16. Over exercising may result in serious injury 

or death. If you feel faint, if you become short 

of breath, or if you experience pain while 

exercising, stop immediately and cool down.

IMPORTANT PRECAUTIONS

Summary of Contents for PRO-FORM 16.0 MME





































Reviews: