background image

18

HOW TO USE A PRESET WORKOUT

1. Begin pedaling or press any button on the

console to turn on the console.

See step 1 on page 16.

2. Select a preset workout.

To select a preset

workout, press the

Workouts button

repeatedly until the

name of the desired

workout appears in

the display. The

workout duration

and a profile of the

resistance levels for

the workout will

also appear in the display.

3. Begin pedaling to start the workout.

Each workout is divided into 20 or 30 one-minute

segments. One resistance level is programmed for

each segment. Note: The same resistance level

may be programmed for consecutive segments.

The resistance level for the first segment will

appear in the display for a few seconds. During

the workout, the workout profile will show your

progress (see the drawing above). The flashing

segment of the profile represents the current seg-

ment of the workout. The height of the flashing

segment indicates the resistance level for the cur-

rent segment.

At the end of each segment of the workout, a

series of tones will sound and the next segment of

the profile will begin to flash. If a different resis-

tance level is programmed for the next segment,

the resistance level will appear in the display for a

few seconds to alert you. The resistance of the

pedals will then change.

If the resistance level for the current segment is

too high or too low, you can manually override the

setting by pressing the Digital Resistance buttons.

IMPORTANT: When the current segment of the

workout ends, the pedals will automatically

adjust to the resistance level programmed for

the next segment.

The workout will continue in this way until the last

segment ends. To stop the workout at any time,

stop pedaling. A tone will sound and the time will

stop counting. To restart the workout, simply

resume pedaling.

4. Follow your progress with the display.

See step 4 on page 16.

5. Measure your heart rate if desired.

See step 5 on page 17.

6. Turn on the fan if desired.

See step 6 on page 17.

7. When you are finished exercising, the console

will turn off automatically.

See step 7 on page 17.

Profile

Summary of Contents for PRO-FORM 10.0 ZE





























Reviews: