background image

13

HOW TO USE THE ELLIPTICAL EXERCISER

HOW TO FOLD AND UNFOLD THE ELLIPTICAL

EXERCISER

When the elliptical exerciser is not in use, the frame

can be folded out of the way. First, lift the latch under

each pedal arm, and lift the pedal arms off the adjust-

ment sleeves on the crank arms.

Next, raise the pedal arms until they touch the mag-

nets on the upper body legs; the magnets will hold the

pedal arms in place. Then, hold the handle and lift the

frame until it locks in a vertical position.

To use the elliptical exerciser, first hold the handle,

press the latch button, and lower the frame.

Next, pull the pedal arms off the magnets on the upper

body legs. Then,

lift the latches under the pedal

arms,

and set the pedal arms on the adjustment

sleeves on the crank arms. Release the latches, and

make sure that the pedal arms are securely connected

to the adjustment sleeves.

HOW TO MOVE THE ELLIPTICAL EXERCISER

To move the elliptical exerciser, first fold it as

described at the left. Next, stand in front of the ellipti-

cal exerciser, hold the upright, and place one foot

against one of the wheels. Pull the upright until the

elliptical exerciser rolls on the front wheels. Carefully

move the elliptical exerciser to the desired position,

and then lower it to the floor.

HOW TO ADJUST THE STRIDE LENGTH OF THE

ELLIPTICAL EXERCISER

To adjust the stride length of the elliptical exerciser,

first pull one of the adjustment knobs until the adjust-

ment arm will pivot freely. Pivot the adjustment arm

until the adjustment knob is aligned with one of the

holes in the crank arm, and gently release the knob

into the hole.

Pivot the adjustment arm back and forth slightly to

make sure that the adjustment pin is engaged in one

of the holes in the crank arm.

Adjust the stride length on the other side of the ellipti-

cal exerciser in the same way.

Make sure that both

sides of the elliptical exerciser are adjusted to the

same stride length.

Handle

Magnet

Latch Button

Sleeve

Crank

Arm

Latch

Pedal Arm

Adjustment

Arm

Adjustment

Knob

Crank

Arm

Holes

Adjustment

Pin

Summary of Contents for PRO-FORM 10.0 ZE





























Reviews: