8
3
130
53
53
133
2. Attach a Wheel (53) to one side of the Stabilizer
(3) with an M10 x 70mm Bolt (130) and an M10
Locknut (133);
do not overtighten the Locknut;
the Wheel should turn freely.
Attach the other Wheel (53) in the same way.
2
3.
Tip: Avoid pinching the wires.
With the help of
one or two other people, set the Upright (4) on
the pins (A) on the Frame (2).
Attach the Upright (4) with eight M10 x 25mm
Screws (123);
start all the Screws, and then
tighten them.
Then, connect the 41" Wire (52) in the Upright
(4) to the 17" Wire (51) in the Frame (2).
Tip: The wire connectors should slide
together easily and snap into place. If they do
not, turn one connector and try again.
3
4
2
2
A
52
51
123
123
Avoid
pinching
the wires
A