12
11
10
124
124
B
C
9
5
10. While a second person holds the Console
Bracket (5) near the Upright (4), insert the 32"
Wire (58) upward through the hole in the side of
the Console Bracket as shown.
Tip: Avoid pinching the wires.
Attach the
Console Bracket (5) to the Upright (4) with
four M10 x 45mm Screws (124);
start all the
Screws, and then tighten them.
11.
Tip: The wire connectors should slide
together easily and snap into place. If they do
not, turn one connector and try again.
While a second person holds the Console (9)
near the Console Bracket (5), connect the wires
(B) on the Console to the matching wires (C) in
the Console Bracket;
make sure to press the
connectors on the wires together firmly.
Insert the excess wire into the Console
Bracket (5).
Avoid pinching
the wires
4
5
58
141
12
Avoid pinching
the wires
12.
Tip: Avoid pinching the wires.
Attach the
Console (9) to the Console Bracket (5) with four
M4 x 16mm Screws (141);
start all the Screws,
and then tighten them.
9
5
