22
HOW TO CHANGE CONSOLE SETTINGS
IMPORTANT: Some of the settings and features
described may not be enabled.
Occasionally, a
firmware update may cause your console to function
slightly differently.
1.
Select the settings main menu.
First, turn on the power and insert the key into the
console (see HOW TO TURN ON THE POWER on
page 16). Note: It may take a few moments for the
console to be ready for use.
Next, select the main menu. When you turn on the
console, the main menu will appear on the screen
after the console boots up. If you are in a workout,
touch the screen, touch
Pause
, touch
End
, and
then touch
Finish
to return to the main menu.
Next, touch your name or
Hello
on the screen, and
then touch
Settings
. The settings menu will appear
on the screen.
2.
Navigate the settings menus and change
settings as desired.
Slide or flick the screen to scroll upward or down-
ward if necessary. To view a settings menu, simply
touch the menu name. To exit a menu, touch the
back button (arrow symbol). You may be able to
view and change settings in the following settings
menus:
Account
•
My Profi le
•
In Workout
•
Manage Accounts
Equipment
•
Equipment Info
•
Equipment Settings
•
Maintenance
•
Wi-Fi
About
•
Legal
3.
Customize the unit of measurement and other
settings.
To customize the unit of measurement, the time
zone, or other settings, touch
Equipment Settings
,
and then touch the desired settings.
The console can display speed and distance in
either standard or metric units of measurement.
4.
View machine information.
Touch
Equipment Info
, and then touch
Machine
Info
to view information about your incline trainer.
5.
Update the console firmware.
For the best results, regularly check for
firmware updates.
Touch
Maintenance
, and then
touch
Update
to check for firmware updates using
your wireless network. The update will begin auto-
matically.
IMPORTANT: To avoid damaging the
console, do not turn off or unplug the incline
trainer while the firmware is being updated.
The screen will show the progress of the update.
When the update is complete, the incline trainer
will turn off and then turn back on. If it does not,
use the power switch (see HOW TO TURN ON
THE POWER on page 16) to turn the incline trainer
off, wait a few seconds, then turn it back on again.
Note: It may take a few minutes for the console to
be ready for use.
Note: Occasionally, a firmware update may cause
the console to function slightly differently. These
updates are always designed to improve your
exercise experience.
6.
Calibrate the incline system of the incline
trainer.
Touch
Calibrate Incline,
and then touch
Begin
to
calibrate the incline system. The walking platform
will automatically rise to the maximum incline level,
and then return to the starting position. This will
calibrate the incline system. Touch
Cancel
to return
to the Maintenance section. When the incline sys-
tem is calibrated, touch
Finish
.
IMPORTANT: Keep pets, feet, and other objects
away from the incline trainer while the incline
system is calibrating. In an emergency, pull
the key from the console to stop the incline
calibration.
7.
Exit the settings main menu.
If you are in a settings menu, touch the back arrow.
Then, touch the close button (x symbol) to exit the
settings main menu.
